Shenzhen Xinchenger Electronic Co.,Ltd
Shenzhen Xinchenger Electronic Co.,Ltd Printed Circuit Board Manufacturer Multilayer&High Frequency PCB Blind Buried Vias Hole
Add to Cart
High Frequency Isola 370HR PCB Printed Circuit Board Fabrication
Specification:
Board size: 8*8 cm
Board thickness: 0.635mm
Copper foil: 35UM
Surface: Lead free
Parameter:
| F4B | F4B | 0.38 | 2.2 |
| F4B | 0.55 | 2.23 | |
| F4B | 0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0 | 2.65 | |
| F4Bk | 0.8,1.5 | 2.65 | |
| F4B | 0.8 | 3.5 | |
| FE=F4BM | 1 | 2.2 | |
| Rogers | RO4003 | 0.254 0.508,0.813,1.524 | 3.38 |
| RO4350 | 0.254 0.508,0.762,1.524 | 3.5 | |
| RO5880 | 0.254.0.508.0.762 | 2.2 | |
| RO3003 | 0.127,0.508,0.762,1.524 | 3 | |
| RO3010 | 0.635 | 10.2 | |
| RO3206 | 0.635MM | 10.2 | |
| R03035 | 0.508MM | 3.5 | |
| RO6010 | 0.635MM, 1,27MM | 10.2 | |
| TACONIC | TLX-8.TLX-9 | 0.508. 0.762 | 2.45-2.65 |
| TLC-32 | 0.254,0.508,0.762 | 3.35 | |
| TLY-5 | 0.254,0.508.0.8, | 2.2 | |
| RF-60A | 0.254.0.508.0.762 | 6.15 | |
| CER-10 | 0.254.0.508.0.762 | 10 | |
| RF-30 | 0.254.0.508.0.762 | 3 | |
| TLA-35 | 0.8 | 3.2 | |
| ARLON | AD255C06099C | 1.5 | 2.55 |
| MCG0300CG | 0.8 | 3.7 | |
| AD0300C | 0.8 | 3 | |
| AD255C03099C | 0.8 | 2.55 | |
| AD255C04099C | 1 | 2.55 | |
| DLC220 | 1 | 2.2 |
Choosing high frequency pcb material :
Selecting a circuit material for a high-frequency printed-circuit board(pcb) is generally a trade-off,often between price and performance.However,PCB materials are also selected by two key factors: how well they meet the needs of an end-use application and what kind of efforts is required to fabricate a desired circuit with a particular material.
These two factors may not mesh:one material may be well suited for a particular application but may pose challenges in terms of circuit fabrication,and vice verse.There is no foolproof,step by step procedure for selecting a PCB material.But by relying on some tangible guildelines designed to evaluate a material in terms of its suitability for circuit fabrication and for meeting the requirements of an application,the process of selecting a PCB for a particaular application can be simplied.
Application:
Telecom:transmitter.receiver.oscillator.antenna
Satellite receiver
Global location system,amplifier.satellite telecom
Microwave transmission
Automobile telephone
Measure apparatus.LSI inspector.analyser.signal oscillator
High frequency telecom.high speed transmission high security.
