Arlon TC600 Circuit Board Pcb 0.8MM Dielectric Constant 6.15 Immersion Silver Surface

Arlon TC600 Circuit Board 0.8MM Dielectric Constant 6.15 Immersion Silver Surface

Specification:
High frequency pcb high-performance insulating material for microwave, radio frequency (RF) and high-speed digital signal processing (DSP) market with PTFE/type woven glass fiber fabric sheet.This material can be applied to LNAs LNBs, PCS/PCN antenna system, global positioning system (GPS) and UMTS antenna system,And the power amplifier, passive components, collision avoidance radar system, aviation help guide remote control technology and system of the phased array radar.
High frequency materials are UL 94V-0 rated for active devices and high power RF designs.



Specification:

The basic characteristics of high-frequency substrate materials require the following:
(1) Dielectric constant (Dk) must be small and very stable, usually the smaller the better the signal transmission rate and the material dielectric constant
Of the square root is inversely proportional to the high dielectric constant easily lead to signal transmission delay.
(2) dielectric loss (Df) must be small, which mainly affects the quality of signal transmission, the smaller the dielectric loss of the signal loss is also smaller.
(3) and the thermal expansion coefficient of copper foil as much as possible, because inconsistencies in the hot and cold changes caused by copper foil separation.
(4) water absorption is low, high water absorption will affect the dielectric constant and dielectric loss.
(5) Other heat resistance, chemical resistance, impact strength, peel strength, etc. must also be good

Is a plate, the material is characterized by a superior dielectric constant temperature stability,
dielectric constant thermal expansion coefficient and copper foil is very consistent, to improve the PTFE substrate.
This product is ideal for applications where the ambient temperature is rapidly changing (aerospace)
and can be used for higher frequency and multilayer structure due to its low dielectric loss and high reliability of metallized vias

Sufficient stock:

We have sufficient Arlon raw material as follow:

AD255C06099C

MCG0300CG

AD0300C

AD255C03099C

AD255C04099C

DLC220

Arlon TC600 Circuit Board 0.8MM Dielectric Constant 6.15 Immersion Silver Surface

Key Specifications/Special Features:
Key Specifications
Number of layers: 2L
Base-material: Arlon TC600
Thickness: 0.8 mm+/-10%
Final-Cu: 35um
Impedance: No
Blind and buried via: Yes
Min. Drill hole: 0.25mm
Min. Line space: 0.127mm
Min. Line width: 0.127mm
Mech. treatment: Routing
Surface treatment: Immersion Silver
100% E-test: Yes
Reasonable price and professional services.
UL,SGS,ISO9001,ISO14001,RoHS and ISO TS16949