Shenzhen Xinchenger Electronic Co.,Ltd
Shenzhen Xinchenger Electronic Co.,Ltd Printed Circuit Board Manufacturer Multilayer&High Frequency PCB Blind Buried Vias Hole
Add to Cart
Double Layer PCB Design Services 1.6MM Thickness Electronics High Frequency Circuit
specification:
layer: multilayer
material: FR4 High Frequency
Tg value: tg135-tg180
board thickness:1.6mm
copper thickness:.1.5oz
surface treatment:Hasl lead free+gold finger
About us:
With 900workers,full-process equippted(including lamination.imersion Gold),we make 1~24layers board in guaranteed quality.
Special Advantage: High frequency board-rogers,ITEQ,board thickness 0.2~7.0mm,copper thickness 1/3~8oz are available )
Introduction:
High frequency pcb widely used in Mobile communication products,
amplifier, low noise amplifier,GSM, CDMA, 3G smart antenna,splitters, diplexers, filters,
couplers and other passive components, Performance:low loss,
high dielectric constant and stable,can provide a small size sheet
Parameter:
| Layers | 1-16 layers | Min Board Thickness(2-layer) | 0.2mm |
| Max Board Size | 635 × 1100mm | Min Board Thickness(4-layer) | 0.6mm |
| Min Board Size | 20 × 30mm | Min Inner-layer Thickness | 0.1mm |
| Min Trace | 0.1mm | Min Annular Ring | 0.1mm |
| Min Space | 0.1mm | Min Hole Location Tolerance | ±0.075mm |
| Min Hole Size | 0.2mm | Min Hole Size Tolerance | ±0.05mm |
| Board Warp | ≤ 1° | Min Outer Dimension Tolerance | ±0.1mm |
| Solder Mask | Green, Yellow, Red, Black, Blue, White | ||
| Surface Finish | HAL, HASL, Immersion Gold, Immersion Silver, Plating Gold, Plating Nickel, Plating Silver, Gold Finger, OSP | ||
| Board Material | FR-4, High Tg FR-4, Thick Copper FR-4, Rogers, Taconic | ||
| Acceptable file | Gerber file(RS-274-X or RS-274-D with aperture list and drill files),Protel,PADS,POWERPCB,AutoCAD,ORCAD | ||
| CAM software | Genesis, CAM350 | ||